TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
1.1mm
Maximum Cable Diameter
2.9mm
Sleeve Length
16mm
Medžiaga
Polyolefin
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+125°C
Spalva
Transparent
Serija
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 438,90
1 Box of 500 (be PVM)
€ 531,07
1 Box of 500 (su PVM)
1
€ 438,90
1 Box of 500 (be PVM)
€ 531,07
1 Box of 500 (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 14 | € 438,90 |
| 15 - 49 | € 417,05 |
| 50+ | € 395,20 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
1.1mm
Maximum Cable Diameter
2.9mm
Sleeve Length
16mm
Medžiaga
Polyolefin
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+125°C
Spalva
Transparent
Serija
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.