FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm

RS kodas: 289-9026Gamintojas: FlexLinkGamintojo kodas: XCEC 12
brand-logo
View all in Jungiamieji komponentai

Techniniai dokumentai

Specifikacijos

Markė

FlexLink

Connector Type

T-Connector

Fits Groove Size

11mm

Fits Strut Profile

44 mm, 88 mm

Thread Size

M5

Medžiaga

Steel

Structural Element Type

Fixing & Connection Element

Product Family

FlexLink

Product System

XC

Kilmės šalis

Sweden

Produkto aprašymas

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 7,46

už 1 vnt. (be PVM)

€ 9,03

už 1 vnt. (su PVM)

FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm
sticker-462

€ 7,46

už 1 vnt. (be PVM)

€ 9,03

už 1 vnt. (su PVM)

FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Pirkti dideliais kiekiais

kiekisVieneto kaina
1 - 4€ 7,46
5 - 9€ 7,14
10+€ 6,72

Techniniai dokumentai

Specifikacijos

Markė

FlexLink

Connector Type

T-Connector

Fits Groove Size

11mm

Fits Strut Profile

44 mm, 88 mm

Thread Size

M5

Medžiaga

Steel

Structural Element Type

Fixing & Connection Element

Product Family

FlexLink

Product System

XC

Kilmės šalis

Sweden

Produkto aprašymas

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.