Techniniai dokumentai
Specifikacijos
Markė
United AutomationAccessory Type
PIR Controller
For Use With
IR Heaters
Model Number
Infresco-P 6kW
Kilmės šalis
United Kingdom
Produkto aprašymas
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a walk test facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.
Power Controller Accessories
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 271,95
už 1 vnt. (be PVM)
€ 329,06
už 1 vnt. (su PVM)
1
€ 271,95
už 1 vnt. (be PVM)
€ 329,06
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 271,95 |
5 - 9 | € 266,70 |
10 - 24 | € 245,70 |
25+ | € 225,75 |
Techniniai dokumentai
Specifikacijos
Markė
United AutomationAccessory Type
PIR Controller
For Use With
IR Heaters
Model Number
Infresco-P 6kW
Kilmės šalis
United Kingdom
Produkto aprašymas
Infresco 6KW PIR Soft-Start Controller P-6kW
The infresco-P 6kW is part of a family of controllers that is designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius. Additional features include a walk test facility and a sensitivity control which were not fitted to the 4kW version.
The microcontroller-based system incorporates Zero-Voltage switching and a Soft-Start function to eliminate the lamps initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Once installed is relatively maintenance free.