STMicroelectronics L298N, Stepper Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V
Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Tvirtinimo tipas
Through Hole
Pakuotės tipas
MULTIWATT V
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
15
Minimum Operating Supply Voltage
4.8 V
Matmenys
19.6 x 5 x 10.7mm
Maksimali darbinė temperatūra
+130 °C
Ilgis
19.6mm
Plotis
5mm
Minimali darbinė temperatūra
-25 °C
Aukštis
10.7mm
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 9,69
Each (In a Tube of 25) (be PVM)
€ 11,725
Each (In a Tube of 25) (su PVM)
25
€ 9,69
Each (In a Tube of 25) (be PVM)
€ 11,725
Each (In a Tube of 25) (su PVM)
25
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Vamzdelis |
|---|---|---|
| 25 - 100 | € 9,69 | € 242,25 |
| 125 - 225 | € 9,12 | € 228,00 |
| 250 - 600 | € 8,645 | € 216,12 |
| 625 - 1225 | € 8,17 | € 204,25 |
| 1250+ | € 7,79 | € 194,75 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Tvirtinimo tipas
Through Hole
Pakuotės tipas
MULTIWATT V
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
15
Minimum Operating Supply Voltage
4.8 V
Matmenys
19.6 x 5 x 10.7mm
Maksimali darbinė temperatūra
+130 °C
Ilgis
19.6mm
Plotis
5mm
Minimali darbinė temperatūra
-25 °C
Aukštis
10.7mm
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products