SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

RS kodas: 849-7323Gamintojas: SMCGamintojo kodas: CS1N300A-PS
brand-logo
View all in Pneumatinių cilindrų ir pavarų priedai

Techniniai dokumentai

Specifikacijos

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Markė

SMC

Kilmės šalis

Japan

Produkto aprašymas

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

1

Galima įsigyti kartotiną kiekį 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder
Sandėlio informacija laikinai nepasiekiama.

1

Galima įsigyti kartotiną kiekį 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Techniniai dokumentai

Specifikacijos

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Markė

SMC

Kilmės šalis

Japan

Produkto aprašymas

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.