Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
115V ac, 230V ac
Secondary Voltage Rating
2 x 12V ac
Galingumas
160VA
Number of Outputs
2
Secondary Current
6.667A
Aukštis
42mm
Weight
1.5kg
Diameter
105mm
Matmenys
105 (Dia.) x 42mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Termination Type
Leads
Maximum Temperature
+40°C
Kilmės šalis
Czech Republic
Produkto aprašymas
Open Style with Leads, 115/230Vac Primary 15VA to 1000VA
High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
UL506, EN61558
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 68,88
už 1 vnt. (be PVM)
€ 83,34
už 1 vnt. (su PVM)
1
€ 68,88
už 1 vnt. (be PVM)
€ 83,34
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 24 | € 68,88 |
25+ | € 66,98 |
Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
115V ac, 230V ac
Secondary Voltage Rating
2 x 12V ac
Galingumas
160VA
Number of Outputs
2
Secondary Current
6.667A
Aukštis
42mm
Weight
1.5kg
Diameter
105mm
Matmenys
105 (Dia.) x 42mm
Minimum Operating Frequency
50Hz
Maximum Operating Frequency
60Hz
Termination Type
Leads
Maximum Temperature
+40°C
Kilmės šalis
Czech Republic
Produkto aprašymas
Open Style with Leads, 115/230Vac Primary 15VA to 1000VA
High quality open style toroidal transformers with twin 115Vac 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Approvals
UL506, EN61558