Techniniai dokumentai
Specifikacijos
Markė
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Tvirtinimo tipas
Surface Mount
Maximum Reset Active Time
700ms
Pakuotės tipas
SOT-23
Kaiščių skaičius
3
Matmenys
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Minimum Operating Supply Voltage
1 V
Produkto aprašymas
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Supervisory & Reset Circuits - Microchip
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,655
Už kiekviena vnt. (tiekiama riteje) (be PVM)
€ 0,793
Už kiekviena vnt. (tiekiama riteje) (su PVM)
5
€ 0,655
Už kiekviena vnt. (tiekiama riteje) (be PVM)
€ 0,793
Už kiekviena vnt. (tiekiama riteje) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Ritė |
---|---|---|
5 - 20 | € 0,655 | € 3,28 |
25 - 95 | € 0,636 | € 3,18 |
100+ | € 0,611 | € 3,06 |
Techniniai dokumentai
Specifikacijos
Markė
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Tvirtinimo tipas
Surface Mount
Maximum Reset Active Time
700ms
Pakuotės tipas
SOT-23
Kaiščių skaičius
3
Matmenys
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Minimum Operating Supply Voltage
1 V
Produkto aprašymas
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.