HellermannTyton WIC1 Snap On Cable Markers, Grey, Pre-printed "8", 2 → 2.8mm Cable, 561-05008 WIC1-PA66-GY
Techniniai dokumentai
Specifikacijos
Markė
HellermannTytonAffixing Method
Snap On
Legend
8
Minimum Cable Diameter
2mm
Maximum Cable Diameter
2.8mm
Spalva
Grey
Ilgis
3mm
Plotis
5 mm
Quantity
200
Printable
No
Medžiaga
Polyamide
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
+85°C
Resistant To
Vibrations
Serija
WIC1
Cable Diameter Range
2 → 2.8mm
Operating Temperature Range
-40 → +85 °C
Produkto aprašymas
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 11,02
1 Bag of 200 (be PVM)
€ 13,33
1 Bag of 200 (su PVM)
1
€ 11,02
1 Bag of 200 (be PVM)
€ 13,33
1 Bag of 200 (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 14 | € 11,02 |
| 15 - 49 | € 10,45 |
| 50+ | € 9,88 |
Techniniai dokumentai
Specifikacijos
Markė
HellermannTytonAffixing Method
Snap On
Legend
8
Minimum Cable Diameter
2mm
Maximum Cable Diameter
2.8mm
Spalva
Grey
Ilgis
3mm
Plotis
5 mm
Quantity
200
Printable
No
Medžiaga
Polyamide
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
+85°C
Resistant To
Vibrations
Serija
WIC1
Cable Diameter Range
2 → 2.8mm
Operating Temperature Range
-40 → +85 °C
Produkto aprašymas
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.