Techniniai dokumentai
Specifikacijos
Markė
FlukeIndicator Type
Voltage
Calibrated
RSCAL
Battery Type
AAA
Power Source
Battery
Safety Category
CAT IV 1000 V
Weight
45.4g
Maximum Detection Voltage
1000V ac
Maksimali darbinė temperatūra
+50°C
Minimum Detection Voltage
90V ac
Minimali darbinė temperatūra
-10°C
Model Number p
2AC
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Model Number (p)
2AC
Kilmės šalis
China
Produkto aprašymas
Fluke 2AC VoltALERT Non-Contact Voltage Detector
VoltALERT non-contact voltage tester is the new addition to this series by Fluke. Pocket-sized and easy to use, the 2AC tests for defective grounds and energized circuits. A glowing red tip lights up when in close proximity of where voltage is present, such as a terminal strips, power cords or outlet wires.
Two new features on this instrument allow the user to be always at the ready, using special low power circuitry to sustain battery life the 2AC is always on the go. An innovative battery check button also allows users to ensure the battery is in good condition. Finally a clip design optimises pocket and tool bag storage.
Standards
Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01, Pollution Degree 2
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 117,60
už 1 vnt. (be PVM)
€ 142,30
už 1 vnt. (su PVM)
1
€ 117,60
už 1 vnt. (be PVM)
€ 142,30
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
FlukeIndicator Type
Voltage
Calibrated
RSCAL
Battery Type
AAA
Power Source
Battery
Safety Category
CAT IV 1000 V
Weight
45.4g
Maximum Detection Voltage
1000V ac
Maksimali darbinė temperatūra
+50°C
Minimum Detection Voltage
90V ac
Minimali darbinė temperatūra
-10°C
Model Number p
2AC
Safety Category Level
CAT IV
Safety Category Voltage
1000V
Model Number (p)
2AC
Kilmės šalis
China
Produkto aprašymas
Fluke 2AC VoltALERT Non-Contact Voltage Detector
VoltALERT non-contact voltage tester is the new addition to this series by Fluke. Pocket-sized and easy to use, the 2AC tests for defective grounds and energized circuits. A glowing red tip lights up when in close proximity of where voltage is present, such as a terminal strips, power cords or outlet wires.
Two new features on this instrument allow the user to be always at the ready, using special low power circuitry to sustain battery life the 2AC is always on the go. An innovative battery check button also allows users to ensure the battery is in good condition. Finally a clip design optimises pocket and tool bag storage.
Standards
Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01, Pollution Degree 2