Crouzet Phase Monitoring Relay, 3 Phase, SP-NO/NC, DIN Rail
Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SP-NO/NC
Tvirtinimo tipas
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Serija
MWA
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Matmenys
69 x 17.5 x 92.6mm
Aukštis
92.6mm
Ilgis
69mm
Operating Temperature Range
+50°C
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 133,95
už 1 vnt. (be PVM)
€ 162,08
už 1 vnt. (su PVM)
1
€ 133,95
už 1 vnt. (be PVM)
€ 162,08
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 133,95 |
| 5 - 9 | € 125,40 |
| 10 - 24 | € 118,75 |
| 25 - 49 | € 112,10 |
| 50+ | € 105,45 |
Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase
Electrical Phase
3
Contact Configuration
SP-NO/NC
Tvirtinimo tipas
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Serija
MWA
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Matmenys
69 x 17.5 x 92.6mm
Aukštis
92.6mm
Ilgis
69mm
Operating Temperature Range
+50°C
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.