Bartec Bartec Series 3 Position Selector Switch Head, Black Handle
Techniniai dokumentai
Specifikacijos
Markė
BartecActuator Colour
Black
Illuminated
No
Number of Positions
3
Actuator Type
Standard Handle
Switch Actuation
Latching
Serija
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Kilmės šalis
Germany
Produkto aprašymas
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 49,40
už 1 vnt. (be PVM)
€ 59,77
už 1 vnt. (su PVM)
1
€ 49,40
už 1 vnt. (be PVM)
€ 59,77
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 49,40 |
| 5 - 9 | € 47,50 |
| 10+ | € 45,22 |
Techniniai dokumentai
Specifikacijos
Markė
BartecActuator Colour
Black
Illuminated
No
Number of Positions
3
Actuator Type
Standard Handle
Switch Actuation
Latching
Serija
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Kilmės šalis
Germany
Produkto aprašymas
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.