Techniniai dokumentai
Specifikacijos
Markė
Analog DevicesPlotis
3.988mm
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SSOP
Kaiščių skaičius
8
Matmenys
5.004 x 3.988 x 1.498mm
Ilgis
5mm
Aukštis
1.498mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Hot Swap Controllers, Linear Technology
Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technologys Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.
Monitor, Control and Protection, Linear Technology
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 4,725
Each (In a Tube of 100) (be PVM)
€ 5,717
Each (In a Tube of 100) (su PVM)
100
€ 4,725
Each (In a Tube of 100) (be PVM)
€ 5,717
Each (In a Tube of 100) (su PVM)
100
Techniniai dokumentai
Specifikacijos
Markė
Analog DevicesPlotis
3.988mm
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SSOP
Kaiščių skaičius
8
Matmenys
5.004 x 3.988 x 1.498mm
Ilgis
5mm
Aukštis
1.498mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Hot Swap Controllers, Linear Technology
Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technologys Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.