Techniniai dokumentai
Specifikacijos
Markė
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Tvirtinimo tipas
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Aukštis
3.02mm
Matmenys
4.09 x 1.52 x 3.02mm
Minimali darbinė temperatūra
-40 °C
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+150 °C
Pakuotės tipas
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Produkto aprašymas
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 1,155
Už kiekviena vnt. (tiekiama dežeje) (be PVM)
€ 1,398
Už kiekviena vnt. (tiekiama dežeje) (su PVM)
5
€ 1,155
Už kiekviena vnt. (tiekiama dežeje) (be PVM)
€ 1,398
Už kiekviena vnt. (tiekiama dežeje) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Maišas |
---|---|---|
5 - 20 | € 1,155 | € 5,78 |
25 - 95 | € 0,928 | € 4,64 |
100 - 245 | € 0,766 | € 3,83 |
250 - 495 | € 0,682 | € 3,41 |
500+ | € 0,666 | € 3,33 |
Techniniai dokumentai
Specifikacijos
Markė
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Tvirtinimo tipas
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Aukštis
3.02mm
Matmenys
4.09 x 1.52 x 3.02mm
Minimali darbinė temperatūra
-40 °C
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+150 °C
Pakuotės tipas
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Produkto aprašymas
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.