Texas Instruments TUSB4041IPAP, USB Hub, 4-Channel, 480Mbit/s, USB 2.0, 64-Pin HTQFP
Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
HTQFP
Kaiščių skaičius
64
Matmenys
10.2 x 10.2 x 1.05mm
Aukštis
1.05mm
Ilgis
10.2mm
Maksimali darbinė temperatūra
-40 → +85 °C
Plotis
10.2mm
Minimali darbinė temperatūra
-40 → +85 °C
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 6,40
už 1 vnt. (be PVM)
€ 7,75
už 1 vnt. (su PVM)
1
€ 6,40
už 1 vnt. (be PVM)
€ 7,75
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 9 | € 6,40 |
10 - 49 | € 5,46 |
50 - 249 | € 5,04 |
250 - 499 | € 4,25 |
500+ | € 3,88 |
Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
4
Data Rate
480Mbit/s
Protocols Supported
USB 2.0
Power Supply Type
Dual
ESD protection
Yes
Typical Dual Supply Voltage
1.1 V, 3.3 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
HTQFP
Kaiščių skaičius
64
Matmenys
10.2 x 10.2 x 1.05mm
Aukštis
1.05mm
Ilgis
10.2mm
Maksimali darbinė temperatūra
-40 → +85 °C
Plotis
10.2mm
Minimali darbinė temperatūra
-40 → +85 °C
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.