Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySplice Type
Butt
Wire Size
22 → 18 AWG
Overall Length
36mm
Minimum Wire Size AWG
18AWG
Diameter
3.7mm
Minimum Wire Size (AWG)
18AWG
Insulation
Insulated
Maximum Wire Size AWG
22AWG
Maximum Wire Size (AWG)
22AWG
Spalva
Red
Serija
Duraseal
Contact Material
Copper
Contact Plating
Tin
Kilmės šalis
Mexico
Produkto aprašymas
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,544
Each (In a Pack of 50) (be PVM)
€ 0,658
Each (In a Pack of 50) (su PVM)
50
€ 0,544
Each (In a Pack of 50) (be PVM)
€ 0,658
Each (In a Pack of 50) (su PVM)
50
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
50 - 200 | € 0,544 | € 27,20 |
250 - 1200 | € 0,491 | € 24,57 |
1250 - 2450 | € 0,427 | € 21,37 |
2500 - 4950 | € 0,382 | € 19,11 |
5000+ | € 0,357 | € 17,85 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySplice Type
Butt
Wire Size
22 → 18 AWG
Overall Length
36mm
Minimum Wire Size AWG
18AWG
Diameter
3.7mm
Minimum Wire Size (AWG)
18AWG
Insulation
Insulated
Maximum Wire Size AWG
22AWG
Maximum Wire Size (AWG)
22AWG
Spalva
Red
Serija
Duraseal
Contact Material
Copper
Contact Plating
Tin
Kilmės šalis
Mexico
Produkto aprašymas
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed