TE Connectivity, DuraSeal Butt Splice Connector, Yellow, Insulated, Tin 12 → 10 AWG
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Spalva
Yellow
Serija
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Distrelec Product Id
30401356
Kilmės šalis
Mexico
Produkto aprašymas
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 41,18
€ 0,824 Each (In a Pack of 50) (be PVM)
€ 49,83
€ 0,997 Each (In a Pack of 50) (su PVM)
50
€ 41,18
€ 0,824 Each (In a Pack of 50) (be PVM)
€ 49,83
€ 0,997 Each (In a Pack of 50) (su PVM)
50
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 50 - 200 | € 0,824 | € 41,18 |
| 250 - 1200 | € 0,758 | € 37,90 |
| 1250 - 2450 | € 0,665 | € 33,25 |
| 2500 - 4950 | € 0,588 | € 29,40 |
| 5000+ | € 0,537 | € 26,84 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Spalva
Yellow
Serija
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Distrelec Product Id
30401356
Kilmės šalis
Mexico
Produkto aprašymas
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed