TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter

RS kodas: 136-2094Gamintojas: TE ConnectivityGamintojo kodas: D-110-0101
brand-logo
View all in Lituoklio įvorės

Techniniai dokumentai

Specifikacijos

Minimum Cable Diameter

2.4mm

Maximum Cable Diameter

4mm

Sleeve Length

36.8mm

Medžiaga

PVDF

Minimali darbinė temperatūra

+125°C

Maksimali darbinė temperatūra

+150°C

Quantity

500

Spalva

Blue

Serija

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Kilmės šalis

Mexico

Produkto aprašymas

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 1 643,25

1 Box of 500 (be PVM)

€ 1 988,33

1 Box of 500 (su PVM)

TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter
sticker-462

€ 1 643,25

1 Box of 500 (be PVM)

€ 1 988,33

1 Box of 500 (su PVM)

TE Connectivity Blue PVDF Solder Sleeve 36.8mm Length 2.41 → 4.32mm Cable Diameter
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Minimum Cable Diameter

2.4mm

Maximum Cable Diameter

4mm

Sleeve Length

36.8mm

Medžiaga

PVDF

Minimali darbinė temperatūra

+125°C

Maksimali darbinė temperatūra

+150°C

Quantity

500

Spalva

Blue

Serija

D-110

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Kilmės šalis

Mexico

Produkto aprašymas

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.