TE Connectivity Yellow Polyolefin Solder Sleeve 42mm Length 2.8 → 6mm Cable Diameter

RS kodas: 136-2082Gamintojas: TE ConnectivityGamintojo kodas: B-155-9004
brand-logo
View all in Lituoklio įvorės

Techniniai dokumentai

Specifikacijos

Minimum Cable Diameter

2.8mm

Maximum Cable Diameter

6mm

Sleeve Length

42mm

Medžiaga

Polyolefin

Minimali darbinė temperatūra

-55°C

Maksimali darbinė temperatūra

+125°C

Quantity

2

Spalva

Yellow

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Serija

B-155

Kilmės šalis

Mexico

Produkto aprašymas

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 215,25

1 Box of 100 (be PVM)

€ 260,45

1 Box of 100 (su PVM)

TE Connectivity Yellow Polyolefin Solder Sleeve 42mm Length 2.8 → 6mm Cable Diameter
sticker-462

€ 215,25

1 Box of 100 (be PVM)

€ 260,45

1 Box of 100 (su PVM)

TE Connectivity Yellow Polyolefin Solder Sleeve 42mm Length 2.8 → 6mm Cable Diameter
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Minimum Cable Diameter

2.8mm

Maximum Cable Diameter

6mm

Sleeve Length

42mm

Medžiaga

Polyolefin

Minimali darbinė temperatūra

-55°C

Maksimali darbinė temperatūra

+125°C

Quantity

2

Spalva

Yellow

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Shrink Temperature

+85°C

Serija

B-155

Kilmės šalis

Mexico

Produkto aprašymas

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.