TE Connectivity DuraSeal Blue Insulated Male Spade Connector, Tab, 6.35 x 0.8mm Tab Size, 1.5mm² to 2.5mm²
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Tab
Serija
Duraseal
Minimum Wire Size mm²
1.5mm²
Gender
Male
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Užbaigimo būdas
Crimp
Spalva
Blue
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Kilmės šalis
Mexico
Produkto aprašymas
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 1 538,25
1 Bag of 1000 (be PVM)
€ 1 861,28
1 Bag of 1000 (su PVM)
1
€ 1 538,25
1 Bag of 1000 (be PVM)
€ 1 861,28
1 Bag of 1000 (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Tab
Serija
Duraseal
Minimum Wire Size mm²
1.5mm²
Gender
Male
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Užbaigimo būdas
Crimp
Spalva
Blue
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Kilmės šalis
Mexico
Produkto aprašymas
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed