TE Connectivity Straight Black, Fluid Resistant Elastomer, 31mm
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Straight
Inside Diameter Primary
31mm
Inside Diameter (Primary)
31mm
Inside Diameter Secondary
31mm
Inside Diameter (Secondary)
31mm
Adhesive Lined
No
Medžiaga
Fluid Resistant Elastomer
Number of Breakouts
1
Spalva
Black
Minimali darbinė temperatūra
-75°C
Maksimali darbinė temperatūra
+150°C
Shrunk Diameter Primary
18mm
Shrunk Diameter (Primary)
18mm
Shrunk Diameter Secondary
7.1mm
Shrunk Diameter (Secondary)
7.1mm
Produkto aprašymas
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 23,20
už 1 vnt. (be PVM)
€ 28,07
už 1 vnt. (su PVM)
1
€ 23,20
už 1 vnt. (be PVM)
€ 28,07
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 14 | € 23,20 |
| 15 - 49 | € 22,47 |
| 50+ | € 21,94 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Straight
Inside Diameter Primary
31mm
Inside Diameter (Primary)
31mm
Inside Diameter Secondary
31mm
Inside Diameter (Secondary)
31mm
Adhesive Lined
No
Medžiaga
Fluid Resistant Elastomer
Number of Breakouts
1
Spalva
Black
Minimali darbinė temperatūra
-75°C
Maksimali darbinė temperatūra
+150°C
Shrunk Diameter Primary
18mm
Shrunk Diameter (Primary)
18mm
Shrunk Diameter Secondary
7.1mm
Shrunk Diameter (Secondary)
7.1mm
Produkto aprašymas
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.