Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Matmenys
13.5 x 11.5 x 2mm
Aukštis
2mm
Ilgis
13.5mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Plotis
11.5mm
Produkto aprašymas
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.
Bluetooth - STMicroelectronics
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 12,39
už 1 vnt. (be PVM)
€ 14,99
už 1 vnt. (su PVM)
1
€ 12,39
už 1 vnt. (be PVM)
€ 14,99
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 9 | € 12,39 |
10 - 49 | € 11,24 |
50 - 99 | € 10,29 |
100 - 499 | € 8,92 |
500+ | € 7,88 |
Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsBluetooth Version
4.1
Maximum Output Power
+4dBm
Receiver Sensitivity
-88dBm
Supported Bus Interfaces
GAP, GATT, L2CAP, LL, RFPHY, SM
Supported I/O Interfaces
IRQ, RESET, SPI
Matmenys
13.5 x 11.5 x 2mm
Aukštis
2mm
Ilgis
13.5mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Plotis
11.5mm
Produkto aprašymas
SPBTLE-RF, Bluetooth Smart V4.1 Very Low Power Module
The SPBTLE-RF is an easy ready-to-use Bluetooth v4.1 compliant. This Smart master/slave mode network processor module supports multiple roles simultaneously. It can act at the same time as Bluetooth Smart sensor and hub device.
The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. A standard SPI interface establishes the communication with an external host microcontroller.
The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery.