Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
PowerSO
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
20
Minimum Operating Supply Voltage
4.8 V
Inverter Power Rating
25W
Maksimali darbinė temperatūra
+130 °C
Ilgis
16mm
Aukštis
3.6mm
Plotis
11.1mm
Matmenys
16 x 11.1 x 3.6mm
Minimali darbinė temperatūra
-25 °C
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 6,30
už 1 vnt. (be PVM)
€ 7,62
už 1 vnt. (su PVM)
1
€ 6,30
už 1 vnt. (be PVM)
€ 7,62
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 6,30 |
5 - 9 | € 5,88 |
10 - 24 | € 5,67 |
25 - 49 | € 5,36 |
50+ | € 5,04 |
Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
PowerSO
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
20
Minimum Operating Supply Voltage
4.8 V
Inverter Power Rating
25W
Maksimali darbinė temperatūra
+130 °C
Ilgis
16mm
Aukštis
3.6mm
Plotis
11.1mm
Matmenys
16 x 11.1 x 3.6mm
Minimali darbinė temperatūra
-25 °C
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.