Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMaximum IGBT Collector Current
3A
Maximum Collector Emitter Voltage
2.7 V
Tvirtinimo tipas
Through Hole
Pakuotės tipas
MULTIWATT V
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
15
Minimum Operating Supply Voltage
4.8 V
Inverter Power Rating
25W
Minimali darbinė temperatūra
-25 °C
Maksimali darbinė temperatūra
+130 °C
Ilgis
19.6mm
Aukštis
5mm
Plotis
17.75mm
Matmenys
19.6 x 17.75 x 5mm
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
P.O.A.
1
P.O.A.
1
Techniniai dokumentai
Specifikacijos
Markė
STMicroelectronicsMaximum IGBT Collector Current
3A
Maximum Collector Emitter Voltage
2.7 V
Tvirtinimo tipas
Through Hole
Pakuotės tipas
MULTIWATT V
Maximum Operating Supply Voltage
46 V
Kaiščių skaičius
15
Minimum Operating Supply Voltage
4.8 V
Inverter Power Rating
25W
Minimali darbinė temperatūra
-25 °C
Maksimali darbinė temperatūra
+130 °C
Ilgis
19.6mm
Aukštis
5mm
Plotis
17.75mm
Matmenys
19.6 x 17.75 x 5mm
Produkto aprašymas
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.