Techniniai dokumentai
Specifikacijos
Markė
SMCConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Bulkhead Tube-to-Tube Adaptor
Connection Style
Tube-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimali darbinė temperatūra
-5 °C, 0°C
Maksimali darbinė temperatūra
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
13mm
Kilmės šalis
Singapore
Produkto aprašymas
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 5,092
Each (In a Pack of 10) (be PVM)
€ 6,161
Each (In a Pack of 10) (su PVM)
10
€ 5,092
Each (In a Pack of 10) (be PVM)
€ 6,161
Each (In a Pack of 10) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
10 - 40 | € 5,092 | € 50,92 |
50 - 90 | € 4,882 | € 48,82 |
100+ | € 4,515 | € 45,15 |
Techniniai dokumentai
Specifikacijos
Markė
SMCConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Bulkhead Tube-to-Tube Adaptor
Connection Style
Tube-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimali darbinė temperatūra
-5 °C, 0°C
Maksimali darbinė temperatūra
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
13mm
Kilmės šalis
Singapore
Produkto aprašymas
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.