Techniniai dokumentai
Specifikacijos
Analogue Output
0.25 → 4 V
IP Rating
IP20
Minimum Pressure Reading
-100Pa
Pressure Reading Type
Differential
Maksimali darbinė temperatūra
+60°C
Media Measured
Air, Non-Aggressive Gas
Accuracy
0.2 %, 1.5 %
Minimali darbinė temperatūra
-10°C
Output Type
Analogue
Maximum Current
5.2 mA
Electrical Connection
3 Pin SMD Connector
Maximum Pressure Reading
3500Pa
Supply Voltage
4.75 → 5.25 V
Response Time
40 ms
Housing Material
PPS
Markė
SensirionSerija
SDP2000
Kilmės šalis
Switzerland
Produkto aprašymas
LDC1314 Evaluation Module for Inductance-to-Digital Converter with Sample PCB Coils, Texas Instruments
The LDC1314 Evaluation Module demonstrates the use of inductive sensing technology to sense and measure the presence, position or composition of a conductive target object. The LDC1314 is a 4-channel, 12-bit Inductance-to-Digital Converter with I²C for Inductive Sensing. The module includes two example PCB sensor coils but can connect to the four channels of the LDC1314. An MSP430 microcontroller is used to interface the Inductance-to-Digital Converter to a host computer.
Inductance to Digital Converters - Texas Instruments
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 2 009,60
Už kiekviena vnt. (tiekiama ant padeklo) (be PVM)
€ 2 431,62
Už kiekviena vnt. (tiekiama ant padeklo) (su PVM)
25
€ 2 009,60
Už kiekviena vnt. (tiekiama ant padeklo) (be PVM)
€ 2 431,62
Už kiekviena vnt. (tiekiama ant padeklo) (su PVM)
25
Techniniai dokumentai
Specifikacijos
Analogue Output
0.25 → 4 V
IP Rating
IP20
Minimum Pressure Reading
-100Pa
Pressure Reading Type
Differential
Maksimali darbinė temperatūra
+60°C
Media Measured
Air, Non-Aggressive Gas
Accuracy
0.2 %, 1.5 %
Minimali darbinė temperatūra
-10°C
Output Type
Analogue
Maximum Current
5.2 mA
Electrical Connection
3 Pin SMD Connector
Maximum Pressure Reading
3500Pa
Supply Voltage
4.75 → 5.25 V
Response Time
40 ms
Housing Material
PPS
Markė
SensirionSerija
SDP2000
Kilmės šalis
Switzerland
Produkto aprašymas
LDC1314 Evaluation Module for Inductance-to-Digital Converter with Sample PCB Coils, Texas Instruments
The LDC1314 Evaluation Module demonstrates the use of inductive sensing technology to sense and measure the presence, position or composition of a conductive target object. The LDC1314 is a 4-channel, 12-bit Inductance-to-Digital Converter with I²C for Inductive Sensing. The module includes two example PCB sensor coils but can connect to the four channels of the LDC1314. An MSP430 microcontroller is used to interface the Inductance-to-Digital Converter to a host computer.