Sensata / Crydom DRC Series Solid State Relay, 7.6 Arms Load, DIN Rail Mount, 510 Vrms Load, 30 V dc Control
Techniniai dokumentai
Specifikacijos
Markė
Sensata / CrydomMaximum Load Current
7.6 Arms
Tvirtinimo tipas
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Number of Poles
3
Contact Configuration
DPST
Terminal Type
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Serija
DRC
Matmenys
45.3 x 95.6 x 86.7mm
Operating Temperature Range
-20 → +60°C
Gylis
95.6mm
PRICED TO CLEAR
Yes
Special Features
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standards Met
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Minimali darbinė temperatūra
-20°C
Aukštis
86.7mm
Capacitance
20pF
Maksimali darbinė temperatūra
+60°C
Off State Leakage Current
5.5 mArms
Ilgis
45.3mm
Kilmės šalis
Mexico
Produkto aprašymas
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 172,20
už 1 vnt. (be PVM)
€ 208,36
už 1 vnt. (su PVM)
1
€ 172,20
už 1 vnt. (be PVM)
€ 208,36
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
Sensata / CrydomMaximum Load Current
7.6 Arms
Tvirtinimo tipas
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Number of Poles
3
Contact Configuration
DPST
Terminal Type
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Serija
DRC
Matmenys
45.3 x 95.6 x 86.7mm
Operating Temperature Range
-20 → +60°C
Gylis
95.6mm
PRICED TO CLEAR
Yes
Special Features
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standards Met
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Minimali darbinė temperatūra
-20°C
Aukštis
86.7mm
Capacitance
20pF
Maksimali darbinė temperatūra
+60°C
Off State Leakage Current
5.5 mArms
Ilgis
45.3mm
Kilmės šalis
Mexico
Produkto aprašymas
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.