Techniniai dokumentai
Specifikacijos
Markė
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Ilgis
45.31mm
Plotis
86.71mm
Gylis
96.02mm
Load Voltage
48 V ac → 510V ac
Minimali darbinė temperatūra
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maksimali darbinė temperatūra
+80°C
Kilmės šalis
Mexico
Produkto aprašymas
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 84,97
už 1 vnt. (be PVM)
€ 102,81
už 1 vnt. (su PVM)
1
€ 84,97
už 1 vnt. (be PVM)
€ 102,81
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 84,97 |
5+ | € 80,64 |
Techniniai dokumentai
Specifikacijos
Markė
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Ilgis
45.31mm
Plotis
86.71mm
Gylis
96.02mm
Load Voltage
48 V ac → 510V ac
Minimali darbinė temperatūra
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maksimali darbinė temperatūra
+80°C
Kilmės šalis
Mexico
Produkto aprašymas
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.