Ruland Beam Coupling, 38mm Outside Diameter, 16mm Bore, 57.2mm Length Coupler
Techniniai dokumentai
Specifikacijos
Markė
RulandCoupling Types
Beam Coupling
Bore
16mm
Outside Diameter
38mm
Ilgis
57.2mm
Torque Rating
10.73Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.76mm
Misalignment - Axial
0.38mm
Kilmės šalis
United States
Produkto aprašymas
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
€ 106,00
€ 106,00 už 1 vnt. (be PVM)
€ 128,26
€ 128,26 už 1 vnt. (su PVM)
1
€ 106,00
€ 106,00 už 1 vnt. (be PVM)
€ 128,26
€ 128,26 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1
Sandėlio informacija laikinai nepasiekiama.
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 106,00 |
| 5 - 9 | € 102,00 |
| 10+ | € 99,50 |
Techniniai dokumentai
Specifikacijos
Markė
RulandCoupling Types
Beam Coupling
Bore
16mm
Outside Diameter
38mm
Ilgis
57.2mm
Torque Rating
10.73Nm
Misalignment - Angular
3°
Misalignment - Parallel
0.76mm
Misalignment - Axial
0.38mm
Kilmės šalis
United States
Produkto aprašymas
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.