RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 27 x 28mm
Techniniai dokumentai
Specifikacijos
Markė
RS ProMatmenys
27 x 28mm
Thickness
0.127mm
Ilgis
27mm
Plotis
28mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimali darbinė temperatūra
-45°C
Maksimali darbinė temperatūra
+125°C
Spalva
Grey
Operating Temperature Range
-45 → +125 °C
Kilmės šalis
United Kingdom
Produkto aprašymas
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 1,05
Each (In a Pack of 10) (be PVM)
€ 1,27
Each (In a Pack of 10) (su PVM)
10
€ 1,05
Each (In a Pack of 10) (be PVM)
€ 1,27
Each (In a Pack of 10) (su PVM)
10
Techniniai dokumentai
Specifikacijos
Markė
RS ProMatmenys
27 x 28mm
Thickness
0.127mm
Ilgis
27mm
Plotis
28mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimali darbinė temperatūra
-45°C
Maksimali darbinė temperatūra
+125°C
Spalva
Grey
Operating Temperature Range
-45 → +125 °C
Kilmės šalis
United Kingdom
Produkto aprašymas
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.