RS PRO Hybrid Stepper Motor 1.8°, 1.2Nm, 6 V dc, 1.8 A, 8 Wires
Techniniai dokumentai
Specifikacijos
Markė
RS ProShaft Diameter
6.35mm
Srovės įvertinimas
1.8 A
Step Angle
1.8°
Gylis
101.5mm
Standards Met
RoHS Compliant
Kilmės šalis
Taiwan, Province Of China
Produkto aprašymas
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 69,82
už 1 vnt. (be PVM)
€ 84,48
už 1 vnt. (su PVM)
1
€ 69,82
už 1 vnt. (be PVM)
€ 84,48
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 69,82 |
| 5 - 9 | € 67,72 |
| 10+ | € 66,15 |
Techniniai dokumentai
Specifikacijos
Markė
RS ProShaft Diameter
6.35mm
Srovės įvertinimas
1.8 A
Step Angle
1.8°
Gylis
101.5mm
Standards Met
RoHS Compliant
Kilmės šalis
Taiwan, Province Of China
Produkto aprašymas
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: