RS PRO Flow Meter, 0.05 → 10 L/min Max
Techniniai dokumentai
Specifikacijos
Markė
RS ProMaximum Flow Rate
0.05 → 10 L/min
Supply Voltage
4.5 → 24 V dc
Pipe Diameter Range
8 mm
Minimali darbinė temperatūra
-25°C
Maksimali darbinė temperatūra
+125°C
Srovės įvertinimas
8 mA
Kilmės šalis
United Kingdom
Produkto aprašymas
Mini Turbine Flow Meter
The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.
At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 189,05
už 1 vnt. (be PVM)
€ 228,75
už 1 vnt. (su PVM)
1
€ 189,05
už 1 vnt. (be PVM)
€ 228,75
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 189,05 |
| 5 - 9 | € 177,65 |
| 10+ | € 168,15 |
Techniniai dokumentai
Specifikacijos
Markė
RS ProMaximum Flow Rate
0.05 → 10 L/min
Supply Voltage
4.5 → 24 V dc
Pipe Diameter Range
8 mm
Minimali darbinė temperatūra
-25°C
Maksimali darbinė temperatūra
+125°C
Srovės įvertinimas
8 mA
Kilmės šalis
United Kingdom
Produkto aprašymas
Mini Turbine Flow Meter
The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.
At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.