Techniniai dokumentai
Specifikacijos
Markė
Renesas ElectronicsTvirtinimo tipas
Through Hole
Timer Type
Standard
Pakuotės tipas
PDIP
Number of Internal Timers
1
Kaiščių skaičius
8
Maximum Input Frequency
1MHz
Minimum Operating Supply Voltage
2 V
Maximum Operating Supply Voltage
18 V
Minimali darbinė temperatūra
-25 °C
Maksimali darbinė temperatūra
+85 °C
Maximum Low Level Output Current
20mA
Maximum High Level Output Current
-0.8mA
Ilgis
10.16mm
Aukštis
4.95mm
Plotis
7.11mm
Matmenys
10.16 x 7.11 x 4.95mm
Produkto aprašymas
555 Timer, Intersil
Intersil offers the 555 timer, a highly stable controller capable of producing accurate timing pulses. With monostable operation, you control the time delay by one external resistor and one capacitor. With a stable operation, the frequency and duty cycle are accurately controlled with two external resistors and one capacitor.
Timers/Timing Generators
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,748
Už kiekviena vnt. (tiekiama tuboje) (be PVM)
€ 0,905
Už kiekviena vnt. (tiekiama tuboje) (su PVM)
10
€ 0,748
Už kiekviena vnt. (tiekiama tuboje) (be PVM)
€ 0,905
Už kiekviena vnt. (tiekiama tuboje) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Vamzdelis |
---|---|---|
10 - 10 | € 0,748 | € 7,48 |
20 - 40 | € 0,615 | € 6,15 |
50 - 90 | € 0,533 | € 5,33 |
100 - 490 | € 0,45 | € 4,50 |
500+ | € 0,428 | € 4,28 |
Techniniai dokumentai
Specifikacijos
Markė
Renesas ElectronicsTvirtinimo tipas
Through Hole
Timer Type
Standard
Pakuotės tipas
PDIP
Number of Internal Timers
1
Kaiščių skaičius
8
Maximum Input Frequency
1MHz
Minimum Operating Supply Voltage
2 V
Maximum Operating Supply Voltage
18 V
Minimali darbinė temperatūra
-25 °C
Maksimali darbinė temperatūra
+85 °C
Maximum Low Level Output Current
20mA
Maximum High Level Output Current
-0.8mA
Ilgis
10.16mm
Aukštis
4.95mm
Plotis
7.11mm
Matmenys
10.16 x 7.11 x 4.95mm
Produkto aprašymas
555 Timer, Intersil
Intersil offers the 555 timer, a highly stable controller capable of producing accurate timing pulses. With monostable operation, you control the time delay by one external resistor and one capacitor. With a stable operation, the frequency and duty cycle are accurately controlled with two external resistors and one capacitor.