Techniniai dokumentai
Specifikacijos
Markė
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
POWERMITE
Kaiščių skaičius
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+150 °C
Matmenys
2.05 x 2.18 x 1.15mm
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Ilgis
2.05mm
Test Current
1A
Aukštis
1.15mm
Plotis
2.18mm
Produkto aprašymas
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.
Transient Voltage Suppressors, ON Semiconductor
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,568
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,687
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
10
€ 0,568
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,687
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Juosta |
---|---|---|
10 - 20 | € 0,568 | € 5,68 |
30 - 140 | € 0,54 | € 5,40 |
150 - 740 | € 0,361 | € 3,61 |
750 - 1490 | € 0,34 | € 3,40 |
1500+ | € 0,267 | € 2,67 |
Techniniai dokumentai
Specifikacijos
Markė
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
POWERMITE
Kaiščių skaičius
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+150 °C
Matmenys
2.05 x 2.18 x 1.15mm
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Ilgis
2.05mm
Test Current
1A
Aukštis
1.15mm
Plotis
2.18mm
Produkto aprašymas
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.