MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595

RS kodas: 136-0764Gamintojas: MikroElektronikaGamintojo kodas: MIKROE-1993
brand-logo

Techniniai dokumentai

Specifikacijos

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

74HC595

Kit Name

7x10 R Click

Produkto aprašymas

7x10 R Click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The 7x10 R click has a matrix of 70 red LEDs driven by a pairs of 8-bit serial-in, parallel-out shift registers, a Darlington transistor array and a Johnson counter. The 7x10 click can be used to display two ASCII characters in standard 7x5 format and communicates with the target microcontroller through the mikroBUS™ SPI interface. The Click board requires a 3.3 or 5V power supply.

Click mikroBUS™ Display & Graphics Boards

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 19,42

už 1 vnt. (be PVM)

€ 23,50

už 1 vnt. (su PVM)

MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595
sticker-462

€ 19,42

už 1 vnt. (be PVM)

€ 23,50

už 1 vnt. (su PVM)

MikroElektronika MIKROE-1993, 7x10 R Click LED Matrix Display Add On Board With 74HC595
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

74HC595

Kit Name

7x10 R Click

Produkto aprašymas

7x10 R Click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The 7x10 R click has a matrix of 70 red LEDs driven by a pairs of 8-bit serial-in, parallel-out shift registers, a Darlington transistor array and a Johnson counter. The 7x10 click can be used to display two ASCII characters in standard 7x5 format and communicates with the target microcontroller through the mikroBUS™ SPI interface. The Click board requires a 3.3 or 5V power supply.

Click mikroBUS™ Display & Graphics Boards