Techniniai dokumentai
Specifikacijos
Markė
MicrochipData Rate
12Mbps
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
QFN
Kaiščių skaičius
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Ilgis
5.1mm
Aukštis
0.95mm
Plotis
5.1mm
Matmenys
5.1 x 5.1 x 0.95mm
Produkto aprašymas
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.
USB (Universal Serial Bus) - Microchip
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 2,678
Už kiekviena vnt. (tiekiama ant padeklo) (be PVM)
€ 3,24
Už kiekviena vnt. (tiekiama ant padeklo) (su PVM)
2
€ 2,678
Už kiekviena vnt. (tiekiama ant padeklo) (be PVM)
€ 3,24
Už kiekviena vnt. (tiekiama ant padeklo) (su PVM)
2
Techniniai dokumentai
Specifikacijos
Markė
MicrochipData Rate
12Mbps
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
QFN
Kaiščių skaičius
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Ilgis
5.1mm
Aukštis
0.95mm
Plotis
5.1mm
Matmenys
5.1 x 5.1 x 0.95mm
Produkto aprašymas
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.