Microchip Boost Converter for MCP1640

RS kodas: 742-4248Gamintojas: MicrochipGamintojo kodas: MCP1640EV-SBC
brand-logo

Techniniai dokumentai

Specifikacijos

Markė

Microchip

Power Management Function

Boost Converter

Kit Classification

Evaluation Board

Featured Device

MCP1640

Kilmės šalis

China

Produkto aprašymas

MCP1640 Boost Converter Evaluation Board

This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter
Easy-to-use and minimum number of external components power supply solution for applications powered by one-cell, two-cell, or three-cell alkaline, NiCd/NiMH; one-cell Li-Ion or Li-Polymer batteries
Selection of the best operating mode for efficiency (PWM/PFM)
A wide input voltage range (0.35 to 5.5V) and low start-up voltage (0.65V)
PCB layouts recommendation for SOT23-6 and 2x3mm-8 DFN packages
Three common output voltages to evaluate: 2.0V, 3.3V and 5.0V enable selection (when disabled, the MCP1640 disconnects the path from input to output for true-disconnect).

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 57,22

už 1 vnt. (be PVM)

€ 69,24

už 1 vnt. (su PVM)

Microchip Boost Converter for MCP1640
sticker-462

€ 57,22

už 1 vnt. (be PVM)

€ 69,24

už 1 vnt. (su PVM)

Microchip Boost Converter for MCP1640
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Markė

Microchip

Power Management Function

Boost Converter

Kit Classification

Evaluation Board

Featured Device

MCP1640

Kilmės šalis

China

Produkto aprašymas

MCP1640 Boost Converter Evaluation Board

This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter
Easy-to-use and minimum number of external components power supply solution for applications powered by one-cell, two-cell, or three-cell alkaline, NiCd/NiMH; one-cell Li-Ion or Li-Polymer batteries
Selection of the best operating mode for efficiency (PWM/PFM)
A wide input voltage range (0.35 to 5.5V) and low start-up voltage (0.65V)
PCB layouts recommendation for SOT23-6 and 2x3mm-8 DFN packages
Three common output voltages to evaluate: 2.0V, 3.3V and 5.0V enable selection (when disabled, the MCP1640 disconnects the path from input to output for true-disconnect).