Microchip 11LC080T-I/TT, 8kbit Serial EEPROM Memory 3-Pin SOT-23 Serial
Techniniai dokumentai
Specifikacijos
Markė
MicrochipMemory Size
8kbit
Interface Type
Serial
Pakuotės tipas
SOT-23
Tvirtinimo tipas
Surface Mount
Kaiščių skaičius
3
Organisation
1K x 8 bit
Minimum Operating Supply Voltage
2.5 V
Maximum Operating Supply Voltage
5.5 V
Matmenys
2.9 x 1.3 x 0.95mm
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Data Retention
200yr
Produkto aprašymas
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchip’s proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.
EEPROM Serial Access - Microchip
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,20
Each (In a Pack of 10) (be PVM)
€ 0,242
Each (In a Pack of 10) (su PVM)
10
€ 0,20
Each (In a Pack of 10) (be PVM)
€ 0,242
Each (In a Pack of 10) (su PVM)
10
Techniniai dokumentai
Specifikacijos
Markė
MicrochipMemory Size
8kbit
Interface Type
Serial
Pakuotės tipas
SOT-23
Tvirtinimo tipas
Surface Mount
Kaiščių skaičius
3
Organisation
1K x 8 bit
Minimum Operating Supply Voltage
2.5 V
Maximum Operating Supply Voltage
5.5 V
Matmenys
2.9 x 1.3 x 0.95mm
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Data Retention
200yr
Produkto aprašymas
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchip’s proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.