MENNEKES IP44 Red Cable Mount 3P + N + E Industrial Power Plug, Rated At 32A, 400 V,With Phase Inverter
Techniniai dokumentai
Specifikacijos
Markė
MennekesSrovės įvertinimas
32A
Plug/Socket
Plug
Pole Format
3P + N + E
Įtampos reitingas
400 V
Tvirtinimo tipas
Cable Mount
Gender
Male
Body Orientation
Straight
Užbaigimo būdas
Screw Terminal
IP Rating
IP44
Spalva
Red
Cable CSA
2.5 → 6mm²
Minimali darbinė temperatūra
-25°C
Maksimali darbinė temperatūra
+55°C
Phase Inverter
Yes
Low Voltage
No
Kilmės šalis
Germany
Produkto aprašymas
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 82,65
už 1 vnt. (be PVM)
€ 100,01
už 1 vnt. (su PVM)
1
€ 82,65
už 1 vnt. (be PVM)
€ 100,01
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 82,65 |
| 5+ | € 78,85 |
Techniniai dokumentai
Specifikacijos
Markė
MennekesSrovės įvertinimas
32A
Plug/Socket
Plug
Pole Format
3P + N + E
Įtampos reitingas
400 V
Tvirtinimo tipas
Cable Mount
Gender
Male
Body Orientation
Straight
Užbaigimo būdas
Screw Terminal
IP Rating
IP44
Spalva
Red
Cable CSA
2.5 → 6mm²
Minimali darbinė temperatūra
-25°C
Maksimali darbinė temperatūra
+55°C
Phase Inverter
Yes
Low Voltage
No
Kilmės šalis
Germany
Produkto aprašymas
Phase Inverter Plug
The Phase inverter plug represents a novel solution for the problem of 3-phase rotating equipment turning in the wrong direction. Two of the phase contact pins are mounted on an insulated plate which can be rotated, but which is held by a pressure interlock when inserted into a socket. If the motor rotates in the wrong direction, then the interlock is simply depressed with a screwdriver and the insulated plate is rotated. This takes only seconds and the motor then turns in the correct direction. The switching of wires between terminals, which is time consuming and dangerous for untrained personnel, is no longer necessary.