Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless UKAS Calibration
Techniniai dokumentai
Specifikacijos
Markė
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
UKAS
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Safety Category Level
CAT III, CAT IV
Weight
1 (with Battery; Excluding Case)kg
Maximum Continuity Resistance
99.9kΩ
Plug Type
BS 1363, LT 300-EN-BS
Aukštis
150mm
Minimali darbinė temperatūra
-10°C
Operating Temperature Range
-10 → +55 °C
Power Source
Battery
Ilgis
85mm
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maksimali darbinė temperatūra
+55°C
Battery Type
AA Alkaline
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Plotis
235mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Matmenys
85 x 235 x 150mm
Kilmės šalis
United Kingdom
Produkto aprašymas
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case
€ 2 327,50
€ 2 327,50 už 1 vnt. (be PVM)
€ 2 816,28
€ 2 816,28 už 1 vnt. (su PVM)
Calibration type
UKAS Calibration
1
€ 2 327,50
€ 2 327,50 už 1 vnt. (be PVM)
€ 2 816,28
€ 2 816,28 už 1 vnt. (su PVM)
Calibration type
UKAS Calibration
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
Techniniai dokumentai
Specifikacijos
Markė
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
UKAS
Automatic RCD Test
Yes
RCD Ramp Test
Yes
Model Number p
MFT1721
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
IP Rating
IP54
Safety Category Level
CAT III, CAT IV
Weight
1 (with Battery; Excluding Case)kg
Maximum Continuity Resistance
99.9kΩ
Plug Type
BS 1363, LT 300-EN-BS
Aukštis
150mm
Minimali darbinė temperatūra
-10°C
Operating Temperature Range
-10 → +55 °C
Power Source
Battery
Ilgis
85mm
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maksimali darbinė temperatūra
+55°C
Battery Type
AA Alkaline
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Plotis
235mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Matmenys
85 x 235 x 150mm
Kilmės šalis
United Kingdom
Produkto aprašymas
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case