Techniniai dokumentai
Specifikacijos
Markė
LumbergSerija
Minimodul
Pitch
2.5mm
Kontaktų skaičius
11
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Tvirtinimo tipas
Through Hole
Connector System
Wire to Board
Užbaigimo būdas
Solder
Contact Plating
Tin
Contact Material
Brass
Srovės įvertinimas
5.0A
Įtampos reitingas
160.0 V
Produkto aprašymas
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,595
Each (In a Pack of 10) (be PVM)
€ 0,72
Each (In a Pack of 10) (su PVM)
10
€ 0,595
Each (In a Pack of 10) (be PVM)
€ 0,72
Each (In a Pack of 10) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
10 - 190 | € 0,595 | € 5,95 |
200 - 740 | € 0,562 | € 5,62 |
750 - 2990 | € 0,528 | € 5,28 |
3000+ | € 0,498 | € 4,98 |
Techniniai dokumentai
Specifikacijos
Markė
LumbergSerija
Minimodul
Pitch
2.5mm
Kontaktų skaičius
11
Number Of Rows
1
Body Orientation
Straight
Shrouded/Unshrouded
Shrouded
Tvirtinimo tipas
Through Hole
Connector System
Wire to Board
Užbaigimo būdas
Solder
Contact Plating
Tin
Contact Material
Brass
Srovės įvertinimas
5.0A
Įtampos reitingas
160.0 V
Produkto aprašymas
Minimodul Vertical Locking Headers
These Lumberg Minimodul™ vertical locking pin headers mate with crimp contact housings (3114 Series), see stock number 737-8482 typical, for indirect mating of wire to board connections.
2.5mm Wire to Board - Lumberg Minimodul Series
These Lumberg Minimodul Connectors are for cable-to-board connections. The Minimodul Series connectors provide easy harnessing of single leads and flat cables with established crimp technology and are especially suitable for low and middle-volume production. The design of the Minimodul Series connectors is suitable for signal and low load currents up to 5 A. Pitch 2.50 mm (.098").