Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 8 mm
Connector B
Push In 8 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 10,92
Each (In a Pack of 5) (be PVM)
€ 13,213
Each (In a Pack of 5) (su PVM)
5
€ 10,92
Each (In a Pack of 5) (be PVM)
€ 13,213
Each (In a Pack of 5) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
5 - 20 | € 10,92 | € 54,60 |
25 - 45 | € 10,605 | € 53,02 |
50+ | € 9,87 | € 49,35 |
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 8 mm
Connector B
Push In 8 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.