Legris LF3000 Series Tee Threaded Adaptor, Push In 4 mm to Push In 4 mm, Threaded-to-Tube Connection Style
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/8 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 6,65
Each (In a Pack of 5) (be PVM)
€ 8,046
Each (In a Pack of 5) (su PVM)
5
€ 6,65
Each (In a Pack of 5) (be PVM)
€ 8,046
Each (In a Pack of 5) (su PVM)
5
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 5 - 20 | € 6,65 | € 33,25 |
| 25 - 45 | € 6,365 | € 31,82 |
| 50+ | € 5,985 | € 29,92 |
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 4 mm
Connector B
Push In 4 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/8 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees