Kopex Reducer, Conduit Fitting, 50mm Nominal Size, M50 → M40, Brass
Techniniai dokumentai
Specifikacijos
Markė
KopexNominal Size
50mm
Fitting Type
Reducer
Thread Size
M50 → M40
Medžiaga
Brass
IP Rating
IP66
Serija
EX/R
Kilmės šalis
United Kingdom
Produkto aprašymas
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 32,96
už 1 vnt. (be PVM)
€ 39,88
už 1 vnt. (su PVM)
1
€ 32,96
už 1 vnt. (be PVM)
€ 39,88
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 9 | € 32,96 |
| 10 - 49 | € 31,26 |
| 50+ | € 30,12 |
Techniniai dokumentai
Specifikacijos
Markė
KopexNominal Size
50mm
Fitting Type
Reducer
Thread Size
M50 → M40
Medžiaga
Brass
IP Rating
IP66
Serija
EX/R
Kilmės šalis
United Kingdom
Produkto aprašymas
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.