Kopex Thread Converter, Conduit Fitting, 20mm Nominal Size, 1/2 Inch NPT → M20, Brass
Techniniai dokumentai
Specifikacijos
Markė
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
1/2 Inch NPT → M20
Medžiaga
Brass
IP Rating
IP66
Serija
EX/TC
Kilmės šalis
United Kingdom
Produkto aprašymas
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 8,55
Each (In a Pack of 5) (be PVM)
€ 10,346
Each (In a Pack of 5) (su PVM)
5
€ 8,55
Each (In a Pack of 5) (be PVM)
€ 10,346
Each (In a Pack of 5) (su PVM)
5
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 5 - 45 | € 8,55 | € 42,75 |
| 50 - 245 | € 8,075 | € 40,38 |
| 250+ | € 7,695 | € 38,48 |
Techniniai dokumentai
Specifikacijos
Markė
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
1/2 Inch NPT → M20
Medžiaga
Brass
IP Rating
IP66
Serija
EX/TC
Kilmės šalis
United Kingdom
Produkto aprašymas
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.