Techniniai dokumentai
Specifikacijos
Markė
JSTSerija
XA
Pitch
2.5mm
Kontaktų skaičius
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Tvirtinimo tipas
Through Hole
Užbaigimo būdas
Solder
Contact Plating
Tin
Contact Material
Copper Alloy
Srovės įvertinimas
3.0A
Įtampos reitingas
250.0 V
Kilmės šalis
Japan
Produkto aprašymas
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,477
Each (In a Pack of 10) (be PVM)
€ 0,577
Each (In a Pack of 10) (su PVM)
10
€ 0,477
Each (In a Pack of 10) (be PVM)
€ 0,577
Each (In a Pack of 10) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
10 - 240 | € 0,477 | € 4,77 |
250 - 990 | € 0,352 | € 3,52 |
1000 - 4990 | € 0,246 | € 2,46 |
5000 - 9990 | € 0,209 | € 2,09 |
10000+ | € 0,197 | € 1,97 |
Techniniai dokumentai
Specifikacijos
Markė
JSTSerija
XA
Pitch
2.5mm
Kontaktų skaičius
2
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Connector System
Wire to Board
Tvirtinimo tipas
Through Hole
Užbaigimo būdas
Solder
Contact Plating
Tin
Contact Material
Copper Alloy
Srovės įvertinimas
3.0A
Įtampos reitingas
250.0 V
Kilmės šalis
Japan
Produkto aprašymas
XA series 90° Shrouded Headers
A range of XA series 2.5mm pitch 90° wire-to-board shrouded PCB header connectors from JST. These side-entry headers have a locking ramp device that provides a secure connection to the mating connector and also helps to prevent disconnection due to vibration or during the assembly process. Insertion guides and polarization bosses are also incorporated into the housing design of these XA series PCB headers to facilitate easy insertion and accurate alignment on the PCB. The connector housings are made from glass filled PA66 nylon which is effective against solder cracking problems.
2.5mm Wire-to-Board Connector, JST XA Series
Please note- the colour of the picture displayed above is for reference only.