ITT Cannon Trident Connector Black, Plastic
Techniniai dokumentai
Specifikacijos
Markė
ITT CannonType
Trident Connector
Adhesive Lined
No
Medžiaga
Plastic
Spalva
Black
Standards Met
UL 94V-0
Serija
Trident Neptune
Produkto aprašymas
Rear Housing
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 6,18
€ 6,18 už 1 vnt. (be PVM)
€ 7,48
€ 7,48 už 1 vnt. (su PVM)
1
€ 6,18
€ 6,18 už 1 vnt. (be PVM)
€ 7,48
€ 7,48 už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 19 | € 6,18 |
| 20 - 39 | € 5,51 |
| 40+ | € 5,04 |
Techniniai dokumentai
Specifikacijos
Markė
ITT CannonType
Trident Connector
Adhesive Lined
No
Medžiaga
Plastic
Spalva
Black
Standards Met
UL 94V-0
Serija
Trident Neptune
Produkto aprašymas
Rear Housing
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.