Techniniai dokumentai
Specifikacijos
Markė
INAInside Diameter
25mm
Outside Diameter
35mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Open
Seals
With Seals
Dynamic Load Rating
2420N
Static Load Rating
2130N
Kilmės šalis
Germany
Produkto aprašymas
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 26,60
už 1 vnt. (be PVM)
€ 32,19
už 1 vnt. (su PVM)
1
€ 26,60
už 1 vnt. (be PVM)
€ 32,19
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 26,60 |
5 - 9 | € 25,46 |
10+ | € 24,04 |
Techniniai dokumentai
Specifikacijos
Markė
INAInside Diameter
25mm
Outside Diameter
35mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Open
Seals
With Seals
Dynamic Load Rating
2420N
Static Load Rating
2130N
Kilmės šalis
Germany
Produkto aprašymas
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.