Honeywell Plunger Limit Switch, 2NO/2NC, DPDT, Die Cast Aluminium Housing, 250V ac Max, 10A Max
Techniniai dokumentai
Specifikacijos
Markė
HoneywellActuator Type
Plunger
Pole and Throw Configuration
DPDT
Normal State Configuration
2NO/2NC
Maximum Current
10A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Action Type
Snap Action
Ilgis
101.6mm
Minimali darbinė temperatūra
-32°C
Gylis
54.86mm
Plotis
33.02mm
Maksimali darbinė temperatūra
+71°C
Mounting Orientation
Vertical
Produkto aprašymas
DTF2 Medium Duty Limit Switches
The DTF2 limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 631,75
€ 631,75 už 1 vnt. (be PVM)
€ 764,42
€ 764,42 už 1 vnt. (su PVM)
1
€ 631,75
€ 631,75 už 1 vnt. (be PVM)
€ 764,42
€ 764,42 už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
HoneywellActuator Type
Plunger
Pole and Throw Configuration
DPDT
Normal State Configuration
2NO/2NC
Maximum Current
10A
Housing Material
Die Cast Aluminium
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Action Type
Snap Action
Ilgis
101.6mm
Minimali darbinė temperatūra
-32°C
Gylis
54.86mm
Plotis
33.02mm
Maksimali darbinė temperatūra
+71°C
Mounting Orientation
Vertical
Produkto aprašymas
DTF2 Medium Duty Limit Switches
The DTF2 limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.