HellermannTyton WIC2 Snap On Cable Markers, Yellow, Pre-printed "-; +; A; E; Earth; L; N; R; S; T", 2.8 → 3.8
Techniniai dokumentai
Specifikacijos
Markė
HellermannTytonAffixing Method
Snap On
Legend
-; +; A; E; Earth; L; N; R; S; T
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
3.8mm
Spalva
Yellow
Ilgis
3mm
Plotis
5.6 mm
Quantity
200
Printable
No
Medžiaga
Polyamide
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
+85°C
Cable Diameter Range
2.8 → 3.8
Resistant To
Vibrations
Serija
WIC2
Operating Temperature Range
-40 → +85 °C
Kilmės šalis
France
Produkto aprašymas
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
€ 13,87
€ 13,87 1 Bag of 200 (be PVM)
€ 16,78
€ 16,78 1 Bag of 200 (su PVM)
1
€ 13,87
€ 13,87 1 Bag of 200 (be PVM)
€ 16,78
€ 16,78 1 Bag of 200 (su PVM)
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
| kiekis | Vieneto kaina |
|---|---|
| 1 - 14 | € 13,87 |
| 15 - 49 | € 13,20 |
| 50+ | € 12,44 |
Techniniai dokumentai
Specifikacijos
Markė
HellermannTytonAffixing Method
Snap On
Legend
-; +; A; E; Earth; L; N; R; S; T
Minimum Cable Diameter
2.8mm
Maximum Cable Diameter
3.8mm
Spalva
Yellow
Ilgis
3mm
Plotis
5.6 mm
Quantity
200
Printable
No
Medžiaga
Polyamide
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
+85°C
Cable Diameter Range
2.8 → 3.8
Resistant To
Vibrations
Serija
WIC2
Operating Temperature Range
-40 → +85 °C
Kilmės šalis
France
Produkto aprašymas
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.