Harting, D-Sub Standard Series, Female Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Techniniai dokumentai
Specifikacijos
Markė
HartingGender
Female
Contact Material
Brass
Wire Size
24 → 20 AWG
Užbaigimo būdas
Crimp
Contact Plating
PdNi
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Serija
D-Sub Standard
Srovės įvertinimas
6.5A
Ilgis
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Kilmės šalis
Germany
Produkto aprašymas
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,244
Each (On a Reel of 500) (be PVM)
€ 0,295
Each (On a Reel of 500) (su PVM)
500
€ 0,244
Each (On a Reel of 500) (be PVM)
€ 0,295
Each (On a Reel of 500) (su PVM)
500
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Ritė |
|---|---|---|
| 500 - 1000 | € 0,244 | € 121,80 |
| 1500 - 2500 | € 0,234 | € 117,08 |
| 3000 - 4500 | € 0,222 | € 110,78 |
| 5000+ | € 0,211 | € 105,52 |
Techniniai dokumentai
Specifikacijos
Markė
HartingGender
Female
Contact Material
Brass
Wire Size
24 → 20 AWG
Užbaigimo būdas
Crimp
Contact Plating
PdNi
Maximum Contact Resistance
≤10MΩ
Contact Type
Pin
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Serija
D-Sub Standard
Srovės įvertinimas
6.5A
Ilgis
14.1mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
Kilmės šalis
Germany
Produkto aprašymas
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807